Retire the Copper. Keep the Phone Line. Savannah POTS Replacement.
Carriers are retiring analog copper. Justin Hall Consulting installs cellular-managed POTS replacement devices that keep elevator phones, fire alarms, gate intercoms, and fax lines working in Savannah buildings. No copper, no surprise bills, and the same RJ-11 jack the legacy equipment plugs into.
the legacy device used
(LTE + Wi-Fi failover)
no surprise bills
Savannah businesses
Copper is going away. The lines you depend on don't.
AT&T and the other carriers have been deregulating analog copper phone service for years. The lines that used to cost Savannah property managers $30/month now run $100 to $300. When a line fails, technician dispatch is weeks out. The lines that elevator phones, fire alarms, gate intercoms, and fax machines actually need are not going to be repaired the way they used to be.
We migrate Savannah buildings off copper with cellular-managed POTS replacement devices. Each device gives the legacy equipment the same RJ-11 jack it was wired for, carries the call over LTE (with Wi-Fi failover on dual-pathway models), and reports its own health to a dashboard you can audit. We pull the old copper bill, audit every line you have, install the new devices, and document everything.
Six legacy lines we retire from Savannah buildings
Each one has its own compliance requirement. We migrate them all with one site visit.
Elevator phones
ASME A17.1 requires a two-way emergency phone in every elevator car that can reach help 24/7. Cellular POTS devices keep that compliance without the copper bill.
Elevator phonesFire alarm lines
NFPA 72 fire alarm circuits used to depend on dedicated copper to reach the monitoring station. Dual-pathway cellular devices meet the code with two independent paths.
POTS hubGate & door entry
Telephone-entry call boxes at parking gates and apartment lobbies still call out over a phone line. We swap the copper for cellular without touching the box itself.
POTS hubFax lines
HIPAA, banking, legal, and healthcare offices still need an inbound fax number. We keep your fax number and the analog signaling, just on cellular underneath.
POTS hubBurglar & facility alarms
Central-station alarm panels that dial out for monitoring keep that exact behavior, just over LTE. We pre-stage the unit, swap the line, and verify with the monitoring center.
POTS hubPool, generator & courtesy phones
Phones at the pool, the loading dock, the generator, the lobby. Any analog phone in a non-staffed location with a 911 obligation gets the same cellular treatment.
POTS hubCertified for the codes Savannah buildings have to meet
Independently certified compliance with NFPA 72, ASME A17.1, UL 1981/2050, HIPAA, FCC, PCI DSS, UN 38.3, and state fire marshal requirements.
The reasons multi-line operators stay
We audit before we quote
We pull your copper carrier statement, walk the building, and produce a line-by-line audit. You get a real number of how many lines you have and what they actually cost, before any migration starts.
Every device is documented
Label, location, dialed number, dashboard ID, and the legacy line it replaced. When something needs attention two years out, the IT and property-management teams have one source of truth.
Multi-site rollouts are the work
Property managers with portfolios across GA get the same install standard, the same labeling, and the same monthly bill format at every building, not five different cellular vendors invoicing separately.
We coordinate the disconnect
Once the cellular device is live and tested with the monitoring center, we file the disconnect with the copper carrier on your behalf. The bill stops the next billing cycle.
Got a copper bill that keeps climbing in Savannah?
Send us the address. We will walk the building, audit the lines, and produce a real number. The audit is free and there is no obligation.
Get a Free POTS AuditFour steps, no surprises
Site audit
We walk the building, identify every analog line, and document the legacy device each one feeds. A line you forgot you were paying for is the typical first surprise.
Migration plan
We map each legacy line to the right cellular device model (standard or dual-pathway), confirm cellular coverage at each location, and put together the migration schedule.
Install & verify
Devices pre-staged in our shop. On site, we install the unit, plug the legacy device into the same RJ-11 jack, and run a verification call with the monitoring station before we leave.
Disconnect & document
We file the copper disconnect with the carrier on your behalf and deliver the as-built documentation. Your IT and property-management teams have one source of truth.
Questions Savannah property managers ask us
Will my elevator phone still pass inspection on cellular?+
Yes. ASME A17.1 requires the elevator phone to reach help and identify the car location 24/7. Dual-pathway cellular POTS devices are explicitly listed for elevator compliance. An inspector knows them and signs off without issue. We hand you the device certification documents at install.
How long does a Savannah migration take?+
For a single building with one or two lines, a few hours on site. For a portfolio with dozens of lines across multiple addresses, the install schedule is typically two to six weeks, sequenced around your operation. The site audit and migration plan come first, before any equipment is ordered.
What happens to my phone number?+
We keep it. The cellular device gets ported the existing copper-line number, so anything that calls or texts the elevator, the alarm panel, or the fax machine keeps the same identity. No reprinting building signage, no notifying tenants of new numbers.
What does it cost vs the copper bill?+
Cellular POTS is typically $30 to $60 a month per line. Copper lines for elevator/alarm service have crept to $100 to $300 a month per line in Savannah. The audit gives you a real number for your building so the decision is based on your actual lines, not someone else's.
Do you handle multi-site portfolios?+
Yes, that is most of our work. We install the same device model, the same labeling, and the same documentation at every address, with one point of contact for the whole portfolio. The dashboards roll up so the IT or property-management team can see every device in one view.
What if cellular coverage at the building is weak?+
That is what the audit catches. We test cellular signal at the exact panel/jack location during the walk. If one carrier is weak, the device supports a different one. If LTE is marginal, we use a dual-pathway model that adds Wi-Fi as the second path.
Justin Hall Consulting across Georgia
Same crew, same standard, city by city.
Start the Savannah POTS migration with a free audit
Tell us the address and what kind of lines you have. We will walk the building, audit every analog line, and produce a written migration plan with real numbers. Free, no obligation.
POTS Replacement in Savannah's Historic and Industrial Markets
Savannah presents two separate environments for POTS replacement. The Landmark Historic District, the 22-square grid of squares on the Savannah Peninsula, contains commercial buildings that in many cases predate the telephone. Elevator monitoring and fire panel communications lines in these buildings run through conduit that was retrofitted decades ago, and the physical space for new hardware is often constrained. When AT&T retires a copper circuit in a historic district building, the replacement device must fit the existing conduit entry and the available panel space. Cellular communicators are usually the most practical option here because they require no new wiring run from the telecom room to the device location.
The industrial market surrounding the Port of Savannah is the second environment, and it runs in the opposite direction. The warehouse and logistics facilities in the Garden City Terminal area and along the Savannah Airport corridor are large-footprint buildings with extensive fire-suppression and fire-alarm systems that report over multiple POTS circuits. These buildings are also primary targets for copper retirement because the carrier infrastructure in the industrial port zone is aging. A distribution facility with a multi-zone fire panel, multiple elevator lines, and a perimeter access-control system can have six to twelve POTS circuits to replace. We approach those projects as a coordinated scope, not a series of one-off service calls.
Savannah falls under Chatham County for permitting purposes outside the city limits. The Savannah Fire Prevention Bureau is the AHJ for life-safety system integration within the city. We hold a Georgia low-voltage contractor license and have completed POTS replacement projects in both the historic district and in the port-area industrial zone. Savannah is 250 miles southeast of Atlanta, and we serve this market for projects with sufficient scope to justify mobilization.